Silicone houseware custom open mold production process
Silicone houseware is made of Silicone houseware mold in the curing machine inside the high temperature molding, the general temperature of about 180 --- 230 degrees, in the molding process, mainly the curing reaction, while the Silicone houseware mold is also the production of handicrafts Special mold, Silicone houseware is characterized by high temperature, corrosion resistance, tear resistance, simulation fine high, is to do all kinds of crafts for the mold.
Customized Silicone houseware are needed to open the mold, the choice of mold form and the choice of mold line is very important, there are three points:
One is to take the mold convenient,
Second, the mold line should be selected without affecting the overall effect of the product,
Three, is not affect the quality of products, such as some of the household items of silicone miscellaneous pieces, especially now is some of the daily necessities of silicone household items.
Different structures lead to different lines, and some products together according to the appearance of the product to choose the best location to open, so out of the Silicone houseware not only conducive to the production, the appearance is also very beautiful. There is also because of too high, resulting in a waste of rubber, and ultimately increase the cost of production in the above. Thereby reducing profits. Mold set up, followed by an important step in the sandblasting, sandblasting this process, not every set of molds are to step by step to do, a little mold does not need such a tool, the specific details of the future for everyone Answer. And then is the recipe will be the color of the net household goods tune.
Silicone houseware should be adjusted in the irregular direction of the deployment, and now most of the factories using large-scale Lianjiao machine, such a mixing machine operating effort, and refining speed, not because of the delay caused by rubber exposure The air to make it oxidation, and finally is to make the curing agent and silica gel household items fully mixed.
When the batch of products need to adjust the color when the glue is the most important part of the color contrast are starting from here, a lot of the product color difference is very large, the main problem is almost all appear here, rubber Density and time in the air will lead to changes in the overall color.
Die from the processing to the production is a careful long process, which for the Cotai Silicone houseware manufacturers, no doubt every day to do each other, but also our long-term work summed up the experience. Customers to the sample to our hands, you can rest assured that the final shipment of finished products, not because of these details and delay delivery.
What are the characteristics and advantages of Silicone houseware products?
1. High temperature: suitable temperature range -40 to 230 degrees Celsius, can be used in microwave ovens and ovens. Can put the microwave bowl and dish, lunch boxes are made of silicone household items.
2. Easy to clean: Silicone houseware to produce the Silicone houseware after washing with water in the water can be restored, but also in the dishwasher cleaning.
3. Long life: silicone household materials, chemical properties is very stable, the system to make the product, compared with other materials have a longer life.
4. Soft and comfortable: thanks to the softness of silicone household materials, cake mold products feel comfortable, highly flexible, no deformation.
5. Color and diverse: according to the needs of customers, the deployment of a different beautiful color. Custom personalized style,
6. Environmental non-toxic: from raw materials into finished products to finished products are not produced any toxic and hazardous substances.
7. Electrical insulation: silicone rubber has a high resistivity, and in a wide temperature range and frequency range of its resistance can remain stable. At the same time silica gel household goods on the high-pressure corona discharge and arc discharge has a good resistance, such as high voltage insulators, TV high pressure caps, electrical parts and so on.